Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Orgalloy® RS 6010 NAT - PA6-GF10... - ARKEMA

Check here, which other Orgalloy RS datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

Orgalloy® RS 6010 NAT resin is a fiberglass reinforced polyamide 6 alloy designed for injection molding. This natural grade offers an outstanding dimensional stability, chemical resistance to automotive fluids and is ideal for the realization of complex parts.

Main applications:

• Electric connectors
• Sport parts

Packaging:
This grade is delivered dried in sealed packaging (25kg bags) ready to be processed.

Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services.

Processing/Physical Characteristics	dry / cond	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	6 / *	cm³/10min	ISO 1133
Temperature	235 / *	°C	-
Load	2.16 / *	kg	-
Molding shrinkage, parallel	0.2 / *	%	ISO 294-4, 2577
Molding shrinkage, normal	0.6 / *	%	ISO 294-4, 2577

Mechanical properties	dry / cond	Unit	Test Standard
ISO Data
Tensile Modulus	4000 / 3650	MPa	ISO 527
Yield stress	78 / 70	MPa	ISO 527
Yield strain	3 / 3.4	%	ISO 527
Nominal strain at break	4 / 4.1	%	ISO 527
Tensile creep modulus, 1h	* / 2530	MPa	ISO 899-1
Tensile creep modulus, 1000h	* / 1790	MPa	ISO 899-1
Charpy impact strength, +23°C	40 / 44	kJ/m²	ISO 179/1eU
Charpy impact strength, -30°C	44 / 45	kJ/m²	ISO 179/1eU
Charpy notched impact strength, +23°C	9 / 9	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -30°C	6 / 6	kJ/m²	ISO 179/1eA
Shore D hardness	74 / *	-	ISO 7619-1

Thermal properties	dry / cond	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	220 / *	°C	ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa	187 / *	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	197 / *	°C	ISO 75-1/-2
Vicat softening temperature, B	167 / *	°C	ISO 306
Burning Behav. at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
Thickness tested	1.6 / *	mm	-
Burning Behav. at thickness h	HB / *	class	IEC 60695-11-10
Thickness tested	3.2 / *	mm	-

Electrical properties	dry / cond	Unit	Test Standard
ISO Data
Relative permittivity, 100Hz	- / 3	-	IEC 62631-2-1
Relative permittivity, 1MHz	- / 3	-	IEC 62631-2-1
Dissipation factor, 100Hz	- / 630	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	- / 240	E-4	IEC 62631-2-1
Volume resistivity	- / >1E13	Ohm*m	IEC 62631-3-1
Surface resistivity	* / >1E15	Ohm	IEC 62631-3-2
Electric strength	36 / 36	kV/mm	IEC 60243-1
Comparative tracking index	* / 600	-	IEC 60112

Other properties	dry / cond	Unit	Test Standard
Water absorption	5.9 / *	%	Sim. to ISO 62
Humidity absorption	2 / *	%	Sim. to ISO 62
Density	1120 / 1120	kg/m³	ISO 1183

Diagrams

Characteristics

Processing

Injection Molding

Delivery form

Pellets, Natural Color

Special Characteristics

Light stabilized or stable to light, Heat stabilized or stable to heat

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Other text information

Injection molding

Processing conditions:
- Drying time (only necessary for bags opened for more than two hours): 4-8 hours at 80°C
- Injection temperature (min-recommended-max): 260-270-280°C
- Mould temperature (min-max): 60-80°C 

Chemical Media Resistance

Acids
	Sulfuric Acid (5% by mass) (23°C)
Bases
	Sodium Hydroxide solution (1% by mass) (23°C)
Alcohols
	Methanol (23°C)
	Ethanol (23°C)
Hydrocarbons
	Toluene (23°C)
Standard Fuels
	Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Salt solutions
	Zinc Chloride solution (50% by mass) (23°C)
Other
	Ethylene Glycol (50% by mass) in water (108°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.